If there is no mark, the upper end surface should be flush with the water surface to prevent the motor from being burnt due to excessive water penetration and overload. you should stop it immediately and restart it after troubleshooting. If the oil in the tank has deteriorated, replace the deteriorated oil, clean the mud and sand in the tank, and inject new oil. The above is all the contents of the aerator introduced for you today, I hope to bring you some help. It can be said that the aerator is the basic equipment to realize the modernization of fishery. At the same time, it is strictly forbidden to contact the motor with water to avoid burning the motor Plastic Automatic Fish Feeder Machine Manufacturers due to flooding.

In the main growing season of fish, pay attention to high temperature during the day and strong sunlight. Impeller and float. During operation, pay attention that people and animals should not approach the impeller of the aerator to avoid damage from the impeller. The protective cover should be installed correctly to prevent the electrical circuit from getting wet. 3. Welcome to call and buy. The aerator supplied by our company has good waterproof performance, stable operation and reasonable price.

The total aquaculture production is increasing year by year, which is inseparable from the gradual realization of mechanization in the aquaculture industry, especially the use of aerators. Use a megohmmeter to check the insulation of the motor, check whether the terminal is safe and stable, and whether the wire is damaged or exposed. Motor. The aerator is subject to greater resistance during work and must be installed firmly. When the aerator is launched into the water, the unit should be moved into the water in a horizontal or nearly horizontal state to prevent the lubricating oil in the reduction box from overflowing from the vent.

It is found that the buoyancy of the floating body is reduced due to wear and tear, and it should be checked and repaired to avoid the increase of the load and the burning of the motor. The cable should be fixed on the rack with a lock clip, and must not be subjected to tensile force, and must not be pulled as a rope to avoid poor contact of the thread. Gearbox. The main fish growing season opens every day.

The installation depth of the aquatic aerator should be such that the 'water line' mark on the impeller is flush with the water surface. 4. In order to ensure safe operation and improve the quality of operation, the following points should be noted: 1. Special attention should be paid to inspection and maintenance. Check whether the impeller is deformed, if it is deformed, repair the original, and then apply anti-rust paint. If it is corroded and leaking, repair it by welding. The aerator uses impeller stirring and other methods to aerate and aerate the water body, improve water quality, promote fish growth and increase fish production. 

Megosztás a facebookon

The impeller type aerator mainly has the functions of aeration, water stirring and aeration, and is a widely used aerator. Commonly used aerators mainly include impeller aerators, waterwheel aerators, jet aerators, etc. It is matched with corresponding plastic pipe connectors or copper connectors It is suitable for the layout of various fishing ponds, and the aquatic aerator brings real economic benefits to farmers. Thank you for your support and encouragement.

Bring some unnecessary troubles to users. Aeration pipes are used in aquaculture. Aeration pipes are commonly known as compressed air aeration, which can be used for aquaculture aeration as well as sewage treatment aeration. This way, to a certain extent, prevent sewage backflow and affect the aeration diaphragm. Therefore, we need special types of diaphragms with low cost and aeration pipes for existing primary uses that can be used continuously for a long time or with a short product update cycle. With the shortage of water resources and water pollution, the treatment of aquaculture water has received more attention.

We will sum up our experience, keep making progress, and provide better aquatic aerators to meet the needs of users. A large number of fine bubbles emerge from the tube wall and are in a state of smoke floating in the water. It does not damage the fish body and is suitable for the use of aeration in the nursery pond. The rapid rise of coastal cities, economic development and national policies have led to the rapid development of the aquaculture industry. Compared with other aerators, the jet aerator has a simple structure and can form water flow and agitate the water body.

The aeration device is different according to its application process, resulting in the elimination of frequent replacement of diaphragm type micropores. The main pipe and the air guide groove are used to pass the silicone rubber membrane through the openings, and the microporous aeration is carried out. Its main working principle: pressurized by an air compression pump to make the aeration tube uniformly expand and reach the design value. The general and related pipes of the aeration pipe are made of PP polyethylene.

When the aeration is stopped, the air holes on the surface of the diaphragm are actively closed. Its characteristic is that it can pond aerator Suppliers make the water flow in the breeding pond form a directional. Aeration and aeration equipment, as the core equipment in the water biological treatment process, has also received increasing attention from the water treatment industry and the business community

Megosztás a facebookon

Domestic environmental protection equipment has become mature and a relatively complete product system has been formed. At this stage, economic development has entered a stable stage, and improving the quality of life of residents and improving the environment have become the focus of social attention. Microporous aeration equipment is often used, but now it is also possible to use aeration brushes.

 

This not only increases the project investment, but also due to maintenance and management. After sacrificing the environment and energy consumption in exchange for the rapid economic growth in the early stage, the urgency of my country’s official and private parties to environmental protection has become increasingly obvious. my country's economic development has entered the middle and late stages of industrialization. Therefore, to play the role of domestic enterprises in the field of environmental protection, promote the development of national industry, accelerate the digestion and absorption of foreign advanced aeration equipment, increase the technological content and localization rate of my country’s aeration equipment, and enhance the competitiveness in the market.

 

The development of aquatic aerator aerator equipment must be based on the development of the environmental protection equipment industry. At this stage, economic development has entered a stable stage, and improving the quality of life of residents and improving the environment have become the focus of social attention. I believe that the advancement of science and technology will bring us better products. aerators for shrimp suppliers Judging from foreign experience, the government's emphasis on environmental protection and large-scale investment generally occurred in the later stages of industrialization.

 

It is an industry progress and a product innovation. It is worth mentioning that the aquatic aerator restores the self-purification function of the water body. For example, one company adopts advanced production machinery and equipment, and another company uses primitive manual production. Compared with the old model, the new aerator tube has improved those aspects. Energy conservation and emission reduction are the inevitable choice for my country's economic development and the original driving force for the development of the environmental protection industry. The circulation performance of the aeration brush can reach 3. The traditional high energy consumption and high pollution production model can no longer meet the requirements of sustainable development. 

Megosztás a facebookon

If there is an abnormal sound, the steering is reversed, and the operation is unequal, it should be shut down immediately, and the abnormal phenomenon should be eliminated before starting. If there is no water line, generally the upper end surface should be parallel to the water surface to prevent overload and burn the motor.

The startup length of the aquatic aerator should be as follows: long startup time on hot days, short startup time on cool days; long startup time in the middle of the night, short startup time at noon; long startup time for small winds, short startup time for high winds.

Determine the boot time. The motor should be checked with Omega meter for insulation, and check whether the terminal is safe and firm, and whether the wire is damaged; the gearbox should be checked one by one for wear and tear of gears, axles,Wholesale Paddle Wheel Aerators etc., simple structure, can form water flow, stir the water body, can make the water body aeration smoothly without damaging the fish body, suitable for fry ponds use. Strictly abide by the safe electricity regulations during installation.

A common type of aerator, impeller aerator: suitable for aeration in ponds with a water depth of more than one meter and a large area. If so, cut off the power supply, connect the fuse, and restart it. After maintenance, all parts should be placed in a moisture-proof place to avoid corrosion, and they should be installed into the machine when needed. The position of the impeller in the water should be aligned with the 'waterline'. 

Megosztás a facebookon

It can be said that the aerator is the basic equipment necessary to realize fishery modernization.Aquatic aerator is a kind of equipment that drives working parts through power sources such as electric motors or diesel engines to quickly transfer oxygen in the air to the aquaculture water body.

This is inseparable from the gradual realization of mechanization in the aquaculture industry, especially the widespread use of aerators. You can continue to pay attention to the relevant knowledge of the Roots aerator and learn more after the convenience of the website. It can comprehensively use physical, chemical and biological functions, not only can solve the problem of fish floating heads caused by lack of oxygen in pond aquaculture, but also eliminate harmful gases, promote water convection and exchange, improve water quality conditions, reduce feed coefficients, and increase fish ponds Activity and primary productivity can increase the stocking density, increase jet aerator the feeding intensity of the breeding objects, promote growth, greatly increase the yield per mu, and fully achieve the purpose of increasing the income of breeding. We have made a detailed understanding through the above article, and hope to help you.

The improvement effect of the aerator on the pond is mainly manifested in that when the fish pond is deficient in oxygen, the aerator can be used to prevent fish and shrimp from floating. In addition, the circulation of the water body also promotes the reproduction and growth of plankton and increases the primary productivity of the pond. The water circulation produced by it is not suitable for the living habits of some cultured objects such as eels and shrimps, but it has a good effect on promoting the healthy and rapid growth of fish and shrimps.

Aquaculture has gradually developed in the direction of high density and intensification, and the total aquaculture production has increased year by year. When the upper layer of dissolved oxygen is high on a sunny day, it can accelerate the convection of the water body, increase the dissolved oxygen in the middle and lower layers of the water body, which is conducive to the rapid growth of fish and shrimp, reduces the feed coefficient, promotes the oxidation and decomposition of organic matter, and reduces the occurrence of diseases.

From Jinhu Electromechanical Company, I will introduce the improvement effect of the aerator on the pond. Jinhu Electromechanical Company is in the future journey, in the production and operation China continues to innovate the management model of the enterprise to build a scientific, planned and professional management platform. It can be seen that the role of the aerator is not only to increase oxygen to the water body, but also to effectively promote the improvement of the primary productivity and self-purification ability of the pond, thereby improving the water quality and the ecological environment of the pond. Performance

Megosztás a facebookon