If there is no mark, the upper end surface should be flush with the water surface to prevent the motor from being burnt due to excessive water penetration and overload. you should stop it immediately and restart it after troubleshooting. If the oil in the tank has deteriorated, replace the deteriorated oil, clean the mud and sand in the tank, and inject new oil. The above is all the contents of the aerator introduced for you today, I hope to bring you some help. It can be said that the aerator is the basic equipment to realize the modernization of fishery. At the same time, it is strictly forbidden to contact the motor with water to avoid burning the motor Plastic Automatic Fish Feeder Machine Manufacturers due to flooding.

In the main growing season of fish, pay attention to high temperature during the day and strong sunlight. Impeller and float. During operation, pay attention that people and animals should not approach the impeller of the aerator to avoid damage from the impeller. The protective cover should be installed correctly to prevent the electrical circuit from getting wet. 3. Welcome to call and buy. The aerator supplied by our company has good waterproof performance, stable operation and reasonable price.

The total aquaculture production is increasing year by year, which is inseparable from the gradual realization of mechanization in the aquaculture industry, especially the use of aerators. Use a megohmmeter to check the insulation of the motor, check whether the terminal is safe and stable, and whether the wire is damaged or exposed. Motor. The aerator is subject to greater resistance during work and must be installed firmly. When the aerator is launched into the water, the unit should be moved into the water in a horizontal or nearly horizontal state to prevent the lubricating oil in the reduction box from overflowing from the vent.

It is found that the buoyancy of the floating body is reduced due to wear and tear, and it should be checked and repaired to avoid the increase of the load and the burning of the motor. The cable should be fixed on the rack with a lock clip, and must not be subjected to tensile force, and must not be pulled as a rope to avoid poor contact of the thread. Gearbox. The main fish growing season opens every day.

The installation depth of the aquatic aerator should be such that the 'water line' mark on the impeller is flush with the water surface. 4. In order to ensure safe operation and improve the quality of operation, the following points should be noted: 1. Special attention should be paid to inspection and maintenance. Check whether the impeller is deformed, if it is deformed, repair the original, and then apply anti-rust paint. If it is corroded and leaking, repair it by welding. The aerator uses impeller stirring and other methods to aerate and aerate the water body, improve water quality, promote fish growth and increase fish production. 

Megosztás a facebookon